Veco 10W Dimmable MR16CW Review
General Information
| ID | #51 |
|---|---|
| SKU | N/A |
| Series | N/A |
| Manufacturer | EPISTAR (other LEDs from EPISTAR) |
| Fitting Type | MR16 (other MR16 LEDs) |
| Light Type | Downlight (PAR) |
| Height | 88mm |
| Diameter | PAR16 (50mm) |
| Weight | 82g |
| Warranty | 2 Years |
| Test Date | 2013-02-22 |
| Review Notes | Manufacturer listed for chip only |
| Price | $18 (AUD) from Ebay on 20th of February 2013 |
| Rating |    |
|---|
LED Specifications
| Claimed | Measured |
Compared To |
|
|---|---|---|---|
| Watts | 10W | 7W @ 12V Electronic Transformer | 54.7W @ 12V |
| Yearly Running Cost[?] | $2.19 | $1.53 | $11.98 |
| Lumens | 425 lm | 450 lm | 765 lm |
| Efficiency[?] | 43 lm/W | 64 lm/W | 14 lm/W |
| Lumens/Purchase Price | 24 lm/$ | 25 lm/$ | 170 lm/$ |
| Power Factor[?] | N/A | 1 | 1 |
| Color [?] | Cool White | Cool White, 6317K | Warm White, 3015K |
| Angle[?] | 60° | 40° | 45° |
| Dimmable | Yes, Leading Edge | Fair | Yes, Trailing Edge |
| CRI (Color Accuracy)[?] | N/A | 76 | |
| Life | 50,000 hours | Not Measured | 6,000 hours |
| Min/Max Voltage | N/A / N/A | N/A | |
| Min/Max Temperature | N/A / N/A | N/A | |
| Measured Temperature | 73°C @ 25°C ambient 163°F @ 77°F ambient |
256°C @ 25°C ambient 493°F @ 77°F ambient |
|
| Flicker Percent[?] | N/A | 3% | |
| Flicker Index[?] | N/A | 0.008 |
Link to manufacturer specifications at time of testing
Dimming measurements
Graph notes: Dimming performance can be highly dependant on the type of dimmer, the number of lights in the circuit and other factors. Results in your house might vary. Mouse over the graph for more details. Position 10 = Not dimmed. Position 1 = Fully dimmed.
Advertisement
Distribution Graph
Angle: 40° (±20° from bottom), Maximum lux:
Graph notes: Shows the intensity of the light when viewed from different angles. Normal omni-directional globes have a fairly constant output all the way around (excepting directly above). Downlights have a narrow range at the bottom in which the light is emmited, this determines their angle.
Spectrum Graph
Graph notes: Shows the breakdown of the LED light into its component colors. With short wavelength ultraviolet on the left and long wavelength infrared on the right. The green line represents the relative absolute strength of the light at each frequency, while the red line represents what the typical human eye would see. The human eye is most sensitive to green light, but much less sensitive to purples and deep reds.
Disclaimer: While every effort has been made to ensure the accuracy of these results, each measurement carries an inherent degree of uncertainty and error. Safety and EMC compliance of products to regional or international standards have not been verified unless noted as an ENERGY STAR® LED Lighting Facts, or SSL Quality Scheme certified product. Retailers and importers selling unmarked or unapproved electrical goods can be fined or imprisoned. Mains supplied downlights require installation by a licensed electrician.