9W LED R80 Lamp Daylight Review
General Information
| ID | #238 |
|---|---|
| SKU | N/A |
| Series | N/A |
| Manufacturer | EZZE Lighting (other LEDs from EZZE Lighting) |
| Fitting Type | E27 (other E27 LEDs) |
| Light Type | Globe |
| Height | 130mm |
| Width | 78mm |
| Weight | 128g |
| Warranty | 3 Years |
| Test Date | 2014-01-02 |
| Review Notes | Carries CE approval and RoHS markings. One of the most efficient bulbs tested here to date, which is partially due to it's high color temperature (6200K). It is also one of the 'coolest' color globes tested to date, as a result the light output has a blue tinge. |
| Price | $24.25 (AUD) from ezzelighting on 1st of January 2014 |
| Rating |   |
|---|
LED Specifications
| Claimed | Measured |
Compared To |
|
|---|---|---|---|
| Watts | 9W | 8.95W @ 241V | 64.7W @ 246V |
| Yearly Running Cost[?] | $1.97 | $1.96 | $14.17 |
| Lumens | 810 lm | 911 lm | 811 lm |
| Efficiency[?] | 90 lm/W | 102 lm/W | 13 lm/W |
| Lumens/Purchase Price | 33 lm/$ | 38 lm/$ | 406 lm/$ |
| Power Factor[?] | N/A | 0.81 | 1 |
| Color [?] | Cool White, 6000K | Cool White, 6230K | Warm White, 2711K |
| Angle[?] | 150° | 118° | Omni-Directional |
| Dimmable | Not Dimmable | N/A | Yes, Trailing Edge |
| CRI (Color Accuracy)[?] | 80 | 86 | |
| Life | 25,000 hours | Not Measured | 1,000 hours |
| Min/Max Voltage | 85V / 240V | 240V / 240V | |
| Min/Max Temperature | N/A / N/A | N/A | |
| Measured Temperature | 54°C @ 25°C ambient 129°F @ 77°F ambient |
158°C @ 25°C ambient 316°F @ 77°F ambient |
|
| Flicker Percent[?] | 19% | 11% | |
| Flicker Index[?] | 0.056 | 0.034 |
Link to manufacturer specifications at time of testing
Advertisement
Distribution Graph
Angle: 118° (±59° from bottom), Maximum lux:
Graph notes: Shows the intensity of the light when viewed from different angles. Normal omni-directional globes have a fairly constant output all the way around (excepting directly above). Downlights have a narrow range at the bottom in which the light is emmited, this determines their angle.
Spectrum Graph
Graph notes: Shows the breakdown of the LED light into its component colors. With short wavelength ultraviolet on the left and long wavelength infrared on the right. The green line represents the relative absolute strength of the light at each frequency, while the red line represents what the typical human eye would see. The human eye is most sensitive to green light, but much less sensitive to purples and deep reds.
Flicker Graph
Percent: 19%, Index: 0.056 (lower is better in both cases)
Graph notes: Shows variation in light output over 1/10th of a second, with relative light output on the Y axis and time on the X Axis. Measured with a photodiode connected to an Oscilloscope. Ideally the yellow line should be flat. Low frequency high amplitude waveforms mean there is a possibility of noticeable flicker, but sensitivity to flicker varies between people. [More details about LED flicker]
Disclaimer: While every effort has been made to ensure the accuracy of these results, each measurement carries an inherent degree of uncertainty and error. Safety and EMC compliance of products to regional or international standards have not been verified unless noted as an ENERGY STAR® LED Lighting Facts, or SSL Quality Scheme certified product. Retailers and importers selling unmarked or unapproved electrical goods can be fined or imprisoned. Mains supplied downlights require installation by a licensed electrician.